Pay in installments of $5.36 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jun 29 - Jul 4
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
truck roof tent Platinum Series Hard Shell Roof Top Tent – AreabfetentsThe rugged and tough design of the Platinum Series ABS (acrylonitrile butadlene styrene). ABS plastic remains hard, rigid and tough even at low temperatures and keeps the overall tent weight to a minimum. The inside of the tent has been lined with pleated anti condensation material. The roof also has storage space to place clothes blankets and shoes. The Platinum Series Hard Shell is supplied with stainless steel hinges and fixings to withstand harsh
The rugged and tough design of the Platinum Series ABS (acrylonitrile-butadlene-styrene). ABS plastic remains hard, rigid and tough even at low temperatures and keeps the overall tent weight to a minimum. The inside of the tent has been lined with pleated anti-condensation material. The roof also has storage space to place clothes blankets and shoes.
The Platinum Series Hard Shell is supplied with stainless steel hinges and fixings to withstand harsh elements. The tent has access points on the left and right sides. The gas struts have been upgraded to hold up the tent in extreme conditions. 4 Window rods are supplied with the RTT to use for the two access points or windows.
Bug Screens are essential along with blocking out the morning light. The Platinum Series Hard Shell will give a bug-free night's sleep and you might be able to sleep in without the morning sun bothering you. The tent has 4 tent rods supplied to secure the windows.
The aerodynamic design of the Platinum Series s improves gas mileage, noise reduction and helps reduce the height of the vehicle overall.
Set up time on this tent is 2 minutes
Telescopic ladder and Lithium-ion rechargeable lamp supplied with the Platinum Series ABS.
*****IMPORTANT SHIPPING NOTE*****
If you order a rooftop tent please be aware that they are shipped via freight carrier and MUST be inspected upon delivery for damage. If damage is noted, please DO NOT ACCEPT delivery. If carrier requires you to accept delivery please note damaged on carrier paperwork. This is REQUIRED for any damage claim, warranty or replacement.
Dimensions & Weights:
Medium Size:
Outside dimensions closed:
Length 84" x Width 50" x Height 12"
Outside dimensions closed:
Length 84" x Width 50" x Height 12"
Internal dimensions open:
Length 81 x Width 47"
Length 81 x Width 47"
Height 35" including mattress
Weight 130 lbs
Large Size:
Outside dimensions closed:
Length 84" x Width 56" x Height 12"
Internal dimensions open:
Length 81" x Width 53"
Length 81" x Width 53"
Height 35" including mattress
Weight 160 lbs
Set up time on this tent is under 1 minute
2 person
4 Seasons RTT
4 Seasons RTT
Included Hardware:
4 x Stainless steel ladder mounts (prefixed)
4 x Stainless steel ladder mounts (prefixed)
4 x Gas struts internal (prefixed)
4 x Window rod mounts (prefixed)
4 X Window rods and 1 bag
4 X Stainless steel locks (prefixed)
1 x Telescopic ladder
1 x Shoebag
1 x Lithium-ion rechargeable lamp
4 x Window rod mounts (prefixed)
4 X Window rods and 1 bag
4 X Stainless steel locks (prefixed)
1 x Telescopic ladder
1 x Shoebag
1 x Lithium-ion rechargeable lamp
1 x Storage cover
1 x Vehicle Mounting Hardware
1 x Memory foam mattress
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.7 ★★★★★
Based on 1078 reviews
Sort
Product Reviews
★★★★★ 4
Reasonably adequate room divider
Size: 4 Panel-88'', Color: Beige
I'm reviewing this as I assemble it.
Couple things:
1. I didn't expect as much assembly. I've ordered dividers before and they more-or-less came as one unit. Sometimes the panels needed screwing together. These require complete assembly and come largely as three rods: two make up vertical columns and snap together. Another one (called part "C") makes the horizontal columns and you have two of these per panel (one attaches to part "A" and the other part "B"). These parts are metal with a plastic shim. Using the wood screws to attach to part "C" is a real pain in the neck. There's not much holding the panel in place so it's a little tricky.
One tactic I've found while I'm assembling that works for the initial connections from parts A and B to their respective "C" rods is to hold the screw in place with a screw driver and then rotating the rod around the screw. This will do a number on your hands if you aren't wearing gloves. This obviously doesn't work when completing the connection.
Using a driller driver on this is really near impossible because there isn't anything you can use to secure it in place. You can use it on the first panel, but as it gets longer, it becomes increasingly difficult and because it isn't wood, it's really tight. I considered drilling larger pilot holes but since there are only 4x4=16 screws I need to screw in, I just decided to use my screw driver to complete it.
2. Also related to assembly. When completing the panels (attaching parts "A" and "B" to parts "C" that have the cloth cover on it), you have to be careful that when you tighten that side that it isn't loosening the other side. Because the pilot holes are so tight, you can end up rotating the rod, which rotates it in the same direction as looser on the original side. Having someone hold the "C" rod in place while you screw it in is probably the easiest approach. I didn't have a 2nd person, so I just had to keep flipping back and forth and tightening both sides as I screwed it in. Not the worlds biggest deal, but annoying nonetheless.
3. The way the instructions are written, they seem to suggest building this thing progressively; that is, you do panel 1, then 2, connect them together, then do 3 and connect it, etc. I took a different route that I suspect saved me quite a bit of trouble, and I assembled all four panels first and THEN connected everything together.
4. For the love of God make sure you check that the plastic tip is on the same side for every panel. Otherwise, you have to take one side apart again and reverse it. On the bright side, if this happens, you've essentially bored out the pilot holes to be the correct size... which is having me question if I shouldn't have just bored them out to the appropriate width in the first place.
5. Attaching all of the panels together is also an enormous pain in the ass unless you happen to have an 88" long elevated surface. Attaching the legs either requires you to elevate one side, which will invariably twist the inexplicably cheap material in the bottom connectors... or you can attach them sideways... or you can put this thing upright, having two people hold the panels in place while you use the allen wrench to tighten the bolts on the underside. None of those are particularly great options.
NOW on to the utility itself.
1. The panels do let some light through (I didn't believe their advertising, and that was one of the reasons that I bought beige, is that I wanted it to not be too dark). They aren't transparent though, so it isn't that far off from their description. They functionally work great, and keep the mess of wires hidden and when I'm sitting at my desk, actually reflect quite a bit of light into my office. Great!
2. My wife has described these as "the most hideous piece of furniture ever conceived of by man." So it does not have spouse approval factor. Granted, she will seldom be in my office area, so that isn't the end of the world.
3. These are really hard to align in a way that doesn't look a little tacky. There are some plastic connectors but they don't do a bang up job of keeping these in place. Each panel is slightly tilted and it's... quite obvious. I may at some point make my own improvements to these to help make them more level. It's not a particularly expensive product so I wasn't expecting much so it's fine and I'm not going to ding them on the rating because of it.
All said, would I buy this product again? Probably not. It's assembly was ~90 minutes which is about 75 minutes longer than I was anticipating spending on this (not including the 5 minute writeup that I'm doing here). But am I going to return it? Also no, if for no other reason I'd be just as annoyed taking it apart and putting it in the original box to return it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 31, 2023
★★★★★ 5
Great product
Color: Black, Size: 4 Panel-88''
Literally exactly what I was needing
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 1, 2026
★★★★★ 5
It's good...
Color: Black, Size: 4 Panel-88'', Color: Black, Size: 4 Panel-88''
It's good....took about 45 minutes to put together. No issues. Looks great...made the wife happy....
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 14, 2026
★★★★★ 5
Durable non see through fabric
Color: Black, Size: 4 Panel-88'', Color: Black, Size: 4 Panel-88''
This room divider is exactly what I need. It is very durable and easy to move around. You can’t see through the fabric. I love it. My reason for purchasing this divider is to use as a divider and as a backdrop holder. And it serves both purposes perfectly. It looks much better in person than on camera. It did have the spots on one side on all of them but in a few days they went away. It foldaway and tucked away easily.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 14, 2025
★★★★★ 4
Great product
Color: Black, Size: 4 Panel-88''
Love the look of this after it’s put together. It’s pretty sturdy and the connecting clips allow you to shape it different if you need it to fit in a corner. We use this at work so it’s great for the space we use it in. A little hard to store because it doesn’t fold up nicely because of the feet on it but I’m happy with it overall.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 19, 2026